Surface Gauge Scribe Lines & Transfer Measurements

Base with V-groove in bottom.

The base has two through guide pins.

The spindle is mounted in a rocker arm, with screw for fine adjusting.

With one straight and one bent steel point. Scriber Length: 7-inch | Spindle Length: 12-inch with Extra 9-inch Spindle | Accurately Scribe Lines & Transfer Measurements

• Design incorporates a fully hardened ground base which serves as an accurate reference surface
• Machined vee groove in the base allows the gauge to be used conveniently on curved surfaces
• Vee groove in front end allows spindle to adjust to any angle
• Grooves on side of base allow for comfortable grip